BBInfinite Does BMX: BOX M30 Euro Install, Entire BB Just 80 grams!

December 28, 2022

 

BMX frames and components have evolved rapidly over the last few years, and BBInfinite is here to bring a boost in speed and needed silence to every pedal stroke. Featured in this video is our Euro (BSA/English threaded) M30 bottom bracket. Running something different? We've got you covered with Euro BB's and Pressfit for 24mm Shimano-pattern cranks, 19mm and 22mm, GXP, DUB, and 30mm, M30, so you can run any crank you want. BBInfinite is here to solve the bottom bracket creaking and squeaking that's ruining you ride. BBInfinite doesn't just fix a bottom bracket creak, we deliver the highest spin performance of any bottom bracket system out there. Faster and creak-free? Absolutely, with BBInfinite. 

 

You asked for it you got it BBInfinite does BMX. Now we've got this beautiful Redline here. This is not one of our bottom brackets and we're going to get rid of this crank and we're going to install one of these Box cranks. This happens to be a Box- P crank. An M30p now if it's an M30p or an M30m that is still the same crank okay it's still M30 and that is the standard and that means it's 30mm on one side and that 28mm. On the other now we have a beautiful bottom bracket for that's right here come on in here and see this gorgeous look at that man, is that gorgeous now you know Box makes a bottom bracket too yeah that one's pretty fancy wouldn't you think now uh let's see how much it weighs now this is with all the hardware as it's going to be on the bike what's looking like right at about a 108 grams almost 109. Here is the BBInfinite version right here - we'll go ahead and put all the hardware on there- look at that. You want to lose some weight that's a good way to do it so the arrow always rolls toward the back- like I always try to visualize it's spinning toward the back wheel so we want to turn that way and then we want to install the non-drive side first. Put a little grease on the inside of this because those two pieces slide together. We want to make sure they do that very easily. And we're going to go ahead and we're going to follow the instructions right here and when we're done putting this in and we're going to be tightening it to the uh about 35 to 40Nm. Alright, it's that simple now a lot of you guys are going to rejoice because this cup tool is that typical BBT 69.3 from park tools or it's the typical 16 notch classic Shimano bottom bracket tool there is this thing that says this side faces crank arm okay that makes it really easy all you need to do is push that down on this side push it down all the way until it touches the face and then come in here and put just a little bit of grease on that and you're going to want to put a little bit of graze on that right there which is the non-drive side this little bushing right here there's a there's a reducer inside there it sticks up very slightly and this will actually slip right over it and it'll help center it and we put a little bit of grease on there because it kind of helps everything stick together i mean just sliding that in just like that look at that you can already tell it's going to spin great from Shimano to Box BBInfinite does BMX. 80 grams that's it

Leave a comment

Comments will be approved before showing up.

Name *

Email *

Comment *

---

Also in BBInfinite exists to elevate the bottom bracket to the high-performance, low-maintenance, reliable component it is meant to be. Rid yourself of press fit bottom bracket creaks and pops. BBInfinite is silent performance.